wc_tx003610gb_FM10.fm
137
Mobile Generator
Using Remote Start Capabilities
Continued from the previous page.
2. Leave the genset controller power switch in the ON position.
3. Close the main circuit breaker.
4. Press the AUTO mode button.
5. Secure the generator by closing and locking all doors.
The generator is now ready for automatic starting.
Maintaining
battery charge
If the generator is to be used as a stand-by power supply, provisions must be made
to maintain the battery charge. This can be done either by attaching a battery
charger to the battery or by starting the generator manually and running the engine
periodically to maintain the battery charge.
To Next Page
Loading...
Need help?
General
