wc_tx003634gb_FM10.fm
30
Label Meanings G 25
N WARNING!
Operation of this equipment may create sparks
that can start fires around dry vegetation. A spark
arrestor may be required. The operator should
contact local fire agencies for laws or regulations
relating to fire prevention requirements.
P Read and understand the supplied Operator’s
Manual before operating the machine. Failure to
do so increases the risk of injury to yourself and
others.
Q1 WARNING
To reduce the risk of electrical shock and arc
flash, read the Operator’s Manual. Improper
connection of the generator to a building’s
electrical system can allow electrical current from
the generator to backfeed into utility lines. This
may result in electrocution of utility workers, fire,
or explosion. Connections to a building’s
electrical system must be made by a qualified
electrician and comply with all applicable laws
and electrical codes.
Q2 Voltage selector label
R Remote start operation. Read Operator’s Manual
for instructions.
S CAUTION
Receptacles not to be used when:
Selector switch set to 208/120V and voltage
greater than 228V.
Selector switch set to 480/277V and voltage
greater than 457V.
WARNING
Operation of This Equipment May Create Sparks That Can Start Fires Around Dry
Vegetation. A Spark Arrestor May be Required. The Operator Should Contact Local
Fire Agencies For Laws or Regulations Relating to Fire Prevention Requirements.
Per CAL. PRC. CODE
To Next Page
Loading...
Need help?
General
