Maintenance G 50
76 wc_tx001050gb.fm
7.2 New Machines
7.2.1 Run generator at least 60–100% of continuous load for the first 100
hours.
7.2.2 Change engine oil and replace oil filter after the first 50 hours.
7.3 Resetting the Periodic Maintenance Timer
After maintenance has been performed on the generator, it is
necessary to reset the periodic maintenance timer.
Resetting from Maintenance Timer Menus
The periodic maintenance timer can be reset while viewing the
maintenance timer pre-alarm or hours remaining. To reset the
periodic maintenance timer while viewing these menus, press and
hold the reset button (6) for 10 seconds.
If pre-alarm is active:
• Main screen
• METERING > ALARM STATUS > PRE-ALARMS
If pre-alarm is not active:
• METERING > ENGINE
• METERING > RUN STATISTICS > CUMULATIVE >
CUMULATIVE
Resetting from Main Menu
The periodic maintenance timer can also be reset from the main
menu.
To Next Page
Loading...
