Safety information GH 3500
8
Maintenance
Regular maintenance is required in order for the machine to operate properly and
reliably over time. Neglected maintenance work can make the machine danger-
ous to use.
Strictly observe the prescribed maintenance intervals.
Do not use the machine if it requires maintenance or repairs.
Malfunctions
If you detect a malfunction, you must shut down and secure the machine imme-
diately.
Eliminate the malfunctions that impair safety immediately!
Replace damaged or defective components immediately!
For further information, please see the chapter Troubleshooting.
Spare parts, accessories
Use only genuine Wacker spare parts and accessories. Non-compliance will ex-
empt the manufacturer from all liability.
Exclusion of liability
Wacker will refuse to accept liability for injuries to persons or for damage to ma-
terials in the following cases:
Structural modifications.
Improper use.
Improper handling.
Use of third-party spare parts and accessories.
Operator's manual
Always keep the operator's manual near the machine or near the worksite for
quick reference.
If you have misplaced the operator's manual or require an additional copy,
please contact your Wacker representative.
Always hand over this operator's manual to other operators or to the future owner
of the machine.
Country-specific regulations
Observe the country-specific regulations, standards and guidelines in reference
to accident prevention and environmental safety, for example those pertaining to
hazardous materials and wearing protective gear.
Supplement the operator's manual with additional company, official or other gen-
eral regulations that may be in effect.
To Next Page
Loading...
Need help?
General
