GH 3500 Safety information
Operator's manual 7
3 Safety information
3.1 General instructions
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine may only be used for generating 42 V high-frequency power.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required maintenance and serv-
ice instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. Failure to do so will endanger your safety! In addition, this will void the
warranty and the liability on behalf of the manufacturer.
Requirements for operation
The ability to operate the machine safely requires:
Proper transport, storage, setup, and assembly.
Careful operation.
Careful repair work.
Operation
Operate the machine only as intended and only when in proper working condi-
tion.
Operate the machine in a safety-conscious manner with all safety devices at-
tached and enabled. Do not modify or disable any safety devices.
Never operate the machine in a potentially explosive environment.
To Next Page
Loading...
Need help?
General
