PT 3 / PT 3A / PT 3H Maintenance
wc_tx001776gb.fm 41
5.9 Sediment Cup (Honda)
See Graphic: wc_gr000029
5.9.1 Turn the fuel valve off.
5.9.2 Remove the sediment cup (a) and the O-ring (b).
5.9.3 Wash both thoroughly in a nonflammable solvent. Dry and reinstall
them.
5.9.4 Turn the fuel valve on and check for leaks.
See Graphic: wc_gr001093
5.10 Cleaning the Fuel Strainer
5.10.1 To remove water and dirt, close the fuel lever and remove the fuel
strainer.
5.10.2 Inspect the fuel strainer (a) for water and dirt.
5.10.3 After removing any dirt and water, wash the fuel cup with a
nonflammable solvent.
5.10.4 Reinstall securely to prevent leakage.
To Next Page
Loading...
Need help?
General
