Putting into operation 4
BA TH412 * 06/2017 * 4512_4-4_Vorbereitung_en.fm
4-43
Engine damage due to the machine tipping over.
► If the machine gets into an extreme slanting position or
if it tips over, stop the engine immediately.
► Do not start the engine after setting the machine
upright again.
► Get in touch with an authorized service center! The
engine needs to be checked by qualified personnel
before it can be released and put into operation again.
Risk of damage to the environment.
► Set the machine upright again as quickly as possible to
prevent oil and fuel from escaping.
► Absorb the escaping oil or fuel immediately with a
binding agent, and dispose of it in an environmentally
friendly manner and separately from other waste.
To Next Page
Loading...
Need help?
General
