Safety 2
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm
2-13
2.7 Attachment operation
Attachments
• Use only attachments that are certified for the machine
or its protective equipment (for example, a shatter
protection).
• All other attachments require the vehicle manufac-
turer’s release.
• The danger zone and the work zone depend on the
attachment used – see the Operator’s Manual of the
attachment.
• Secure the load.
• Do not overload attachments.
• Check the correct position of the lock.
Operating
• Carrying persons on/in an attachment is prohibited.
• Installing a work platform is prohibited.
• Attachments and counterweights modify handling, as
well as the steering and braking capability of the
machine.
• The operator must be familiar with these modifications
and act accordingly.
• Before starting work, operate the attachment to check
that it works correctly.
• Before putting the attachment into operation, ensure
that nobody is in danger.
• Lower the attachment to the ground before leaving the
operator's seat.
To Next Page
Loading...
Need help?
General
