4-38
BA TH412 * 06/2017 * 4512_4-4_Vorbereitung_en.fm
4 Putting into operation
4.4 Preparations
Information about putting the vehicle into operation
• Read and understand the Operator’s Manual before
putting the machine into operation!
• Operate the machine only from the operator seat!
• Pay attention to all safety instructions.
• Have qualified personnel instruct you before using the
machine for the first time. Perform test runs on open
terrain.
• Check the condition of the machine before starting
work.
• Have the machine checked by qualified personnel
before putting it into operation again after it has been
out of operation over a longer period of time.
Tips on how to achieve optimal output
• Do not put a cold diesel engine under load
➥ Let the diesel engine warm up at low engine speed
(1/4 throttle) for about 30 seconds.
• Avoid loading the diesel engine at idling speed.
➥ Avoid low-load operation (less than 20% load).
• Do not run the diesel engine at high speed for
extended periods.
• Strictly observe maintenance intervals and perform (or
have performed) the mandatory maintenance.
Putting into operation
To Next Page
Loading...
