5-4
BA TH412 * 06/2017 * 4512_5-3_Bremse_en.fm
5 Operation
5.3 Brake
Parking brake Applying the parking brake prevents the machine from
rolling away unintentionally.
• Move the control lever 2 into position 1.
- For support, pres the brake/inching
pedal 11 (
Fig. 45).
➥ The parking brake is applied.
• Move the control lever 2 into position 0.
➥ The parking brake is released.
Pulling control lever 2 alone may not be enough to
prevent the machine from rolling away. Also press pedal
11 for additional support.
The drive of the machine is switched off if the parking
brake is applied (immobilizer).
In order to release the parking brake, slightly pull control
lever 2 toward X and press button K with your thumb.
Operation
To Next Page
Loading...
