7-26
BA TH412 * 06/2017 * 4512_7-6_Abschmieren_en.fm
7 Maintenance
7.6 Lubrication work
Preparing lubrication
• Park the machine on firm, level and dry ground.
• Secure the machine with the parking brake and wheel
chocks.
• Extend and lower the (telescopic) loader unit until all
lubrication points can be accessed from the ground.
• Stop the engine and remove the starting key.
• Operate and remove the battery master switch.
Lubricate the lubrication points every 20 operating hours
with water-resistant multi-purpose grease. Lubricate all
other moving parts such as the parking-brake lever,
pedals, Bowden cables, etc. with an oil can.
►
Lubrication plan on page 7-18
Maintenance
To Next Page
Loading...
