5-58
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5 Operation
Accident hazard due to overload and sudden
movements!
Overload and sudden movements can cause accidents
and injury.
► Pay attention to the load diagram and payloads of the
machine.
► Actuate the control lever carefully.
When driving into the material to be loaded, adapt the
travel speed to the nature of the material and the given
conditions.
Avoid too much wheel spin. Tire wear and fuel
consumption is unnecessarily increased, and machine
output cannot be fully used.
This Operator’s Manual only describes the use of the
following attachments:
• Light-weight materials bucket
• Earth bucket
• Earth bucket with digging teeth
• 4-in-1 bucket
• Manure forks
• Fork-and-grab attachment
•Pallet forks
Observe the following if additional attachments are used
for the machine:
If other attachments are to be used, always follow the
Operator’s Manuals of these attachments. Specific
Operator’s Manuals can be ordered from your Wacker
Neuson dealer.
To Next Page
Loading...
