Operation 5
BA TH412 * 06/2017 * 4512_5-13_5_Opt_Sonst_en.fm
5-111
Connecting the engine oil and hydraulic oil pre-
heating:
1. Park the machine near a 230 V mains power outlet
with a residual current circuit breaker.
2. Open the engine cover.
3. Connect special cable (A) supplied with the machine
with machine power outlet (B).
4. Connect the plug to a 230 V mains power outlet.
➥ The engine and hydraulic oil is being preheated.
Before starting the engine:
1. Remove the plug from the 230 V mains power outlet.
2. Unplug special cable (A) from machine power outlet
(B).
3. Close the engine cover.
To Next Page
Loading...
