7-2
BA TH412 * 06/2017 * 4512_7-1_Hinweise_en.fm
7 Maintenance
Information on the machine and the attachment
• Only perform maintenance and inspection work if the
machine is secured as described in chapter
Securing
the vehicle on page 5-14.
• A raised loader unit can fall suddenly and cause
serious injury.
➥ A raised loader unit must be secured with a suitable
support if it is absolutely necessary to work
underneath it – see "Safety instructions on the
telescopic boom" on page 5-31.
• Lower attachments on the ground ensuring that no
movements can occur when releasing mechanical or
hydraulic connections.
• Secure equipment or components that are to be
attached or removed, or whose installation position is
to be changed, with the aid of suitable lifting gear or
with mounting or support devices to prevent uninten-
tional movement, slipping or falling.
• Remove dirt from steps and handholds to keep them
safe and ready for use.
Information on tools
• Only work with suitable and functional tools.
Information on cleaning work
• Clean units in the working area before starting work.
The choice of the cleaning agents depends on the
material of the parts to be cleaned.
• Rubber parts and electrical components must not be
cleaned with solvents or steam. Water can cause short
circuits in the electrical system and cause new
hazards.
• Do not use solvents that give off harmful or flammable
vapors.
• Avoid skin contact with cleaning agents.
➥ Wear protective equipment.
To Next Page
Loading...
Need help?
General
