7-8
BA TH412 * 06/2017 * 4512_7-1_Hinweise_en.fm
7 Maintenance
Inspection schedules
Inspection after 30 operating hours
The maintenance and inspection personnel must have
specialized knowledge about the maintenance and
inspection work on the machine.
► Observe the Operator’s Manual of the engine.
Work to be performed by an authorized service center after 30 operating hours
Check the gearbox, engine and hydraulic system for leaks
Check the hydraulic, water and engine oil radiator for dirt
Check the coolant level and antifreeze
Check the tension and condition of the V-belt
Check the hoses and pipes for secure seating
Check the routing of the hoses and pipes
Check the piston rods of the hydraulic cylinders
Check the routing of Bowden cables and electric cables
Retighten all bolts; pay particular attention to the engine mounting, axle mountings and cardan shaft
Check the instruments and acoustic warning devices
To Next Page
Loading...
Need help?
General
