Safety 2
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm
2-9
• The attachment fitted onto the vehicle must be empty
and in transport position.
• The attachment fitted onto the vehicle must be
equipped with the mandatory lights and protective
equipment.
• Take measures against unintentional operation of the
operating hydraulics.
• If the vehicle has different steering modes, ensure that
the mandatory steering mode is selected.
Stopping the engine of the machine
• Stop the engine only according to the Operator’s
Manual.
• Before stopping the engine, lower the work equipment/
attachment to the ground.
Stopping and securing the vehicle
• Unbuckle the seat belt only after stopping the engine.
• Before leaving the machine, secure it to prevent it from
rolling away (for example, with the parking brake,
suitable wheel chocks).
• Remove the starting key and secure the vehicle
against unauthorized operation.
To Next Page
Loading...
