EasyManua.ls Logo

Wacker Neuson Telehandler TH412

Wacker Neuson Telehandler TH412
362 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-36
BA TH412 * 06/2017 * 4512_7-9_Kuehlsystem_en.fm
7 Maintenance
Information on checking/adding coolant
CAUTION
Burn hazard due to hot coolant!
Hot coolant can cause burns to the skin.
Do not open the coolant reservoir if the engine is hot or
if the cooling system is under pressure.
Let the engine cool down.
Wear protective equipment.
NOTICE
Damage to the engine and cooling system.
The coolant should be made up to equal parts of water
and antifreeze. This mixture ensures the best possible
ratio between cooling performance, antifreeze and
anti-corrosion protection.
Do not add the coolant too quickly if the full capacity
has to be added, for example, when replacing the
coolant. Fill a maximum 5 l/min. If the coolant is added
too quickly to the cooling system, air bubbles can be
trapped in the cooling system and cause engine
overheating.

Table of Contents

Related product manuals