8-4
BA TH412 * 06/2017 * 4512_8_Stoerungen_en.fm
8 Malfunctions
Fault at the drive
Error/malfunction Possible cause Remedy
Engine is running but
machine will not travel
Operator not seated on the operator seat Sit down on the operator seat
Manual inching (option) is actuated Switch off manual inching
Malfunctioning operator presence switch Have the operator presence switch replaced
Malfunctioning parking brake switch Have the parking brake switch replaced
Parking brake is applied Release the parking brake
The inching cartridge is not in the 0-position
Check and if necessary have the inching car-
tridge repaired
Malfunctioning electronics control box Have the electronics control box replaced
The solenoids on the hydraulic pump are not
receiving any electrical power
Check the fuses, have the loader unit control
levers and the electronics checked in a ser-
vice center
Drive does not have
enough output
Inching is stuck Have checked and repaired
Manual inching (option) is actuated Switch off manual inching
Continuous operation of the hydraulic connec-
tions is switched on and operates against
pressure
Switch off continuous operation of hydraulic
connections