2-26
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm
2 Safety
Working near non-electric supply lines
• Before performing any work, the operator must check
whether there are any non-electric supply lines in the
job site.
• If there are non-electric supply lines, the operator must
take safety measures (for example, switching off the
supply line) in agreement with the operating company
or owner of the supply lines.
• If supply lines are exposed, they must be fastened,
supported and secured accordingly.
Behavior during thunderstorm
• Stop machine operation if a thunderstorm is gathering,
stop the machine, secure and leave it, and avoid being
near it.
Noise
• Observe the noise regulations (for example, during
applications in enclosed premises).
• Bear in mind external sources of noise (compressed-
air hammer, concrete saw).
• Do not remove the sound baffles of the machine/
attachment.
• Have damaged sound baffles immediately replaced
(for example, an insulating mat, muffler).
• Before starting work, get informed on the noise level of
the machine/attachment (for example on the adhesive
label) – wear ear protectors.
• Do not wear ear protectors during machine travel on
public roads/sites.
To Next Page
Loading...
