Introduction 3
BA TH412 * 06/2017 * 4512_3-1_Einleitung_en.fm
3-5
Travel drive
The machine is driven by a diesel engine that powers the
steering, operating and machine-travel hydraulics.
The travel hydraulics are driven by the transfer gearbox,
which transmits the power to the rear axle and, via the
cardan shaft, to the front axle.
The axles are designed as steering axles with kingpin
steering.
Brakes
The drive also has the function of a service brake with
effect on the front and rear axles. The brake is activated
via the braking-inching pedal. Furthermore, the disk brake
on the differential is operated with the brake/inching
pedal. The parking brake also has effect on this disk
brake.
Steering system
The steering is designed as a kingpin steering system on
the front and rear axles. It is hydraulically operated via
double-acting cylinders.
To Next Page
Loading...
Need help?
General
