4-12
BA TH412 * 06/2017 * 4512_4-1_Steuerstand_en.fm
4 Putting into operation
Field of vision and rearview mirrors
Limited field of vision
Injury hazard due to restricted field of vision!
The operator may possibly fail to see persons entering the
danger zone or who are already in it, and these persons
can be injured.
► Check the field of vision before putting the machine
into operation.
► Adjust the mirrors before putting the machine into
operation.
► Remove attachments before performing machine
travel on public roads.
The field of vision is the area the operator can see from
the seat. Rearview mirrors or camera systems can be
installed on the machine to support the operator.
Limited field of vision during work operation
Accident hazard due to restricted field of vision!
The operator may fail to see persons and objects due to
the limited field of vision.
► Check the field of vision before putting the machine
into operation.
► Adjust the mirrors before putting the machine into
operation.
► Remove obstacles within the job site.
► Set the loader unit to the lowest possible position
before transporting material.
► Ensure the full field of vision with suitable measures
(for example a camera or person guiding the operator).
To Next Page
Loading...
