Safety
Safety features 4.10
19
[en] | 02/2020 | 5100056064 | VP | Operator’s manual
Safety distances
Compaction work in the vicinity of buildings can lead to building damage.
Therefore, any possible effects and vibrations on surrounding buildings
must be checked in advance.
The relevant regulations and codes of practice for measuring, assessing
and reducing vibration immissions must be observed, in particular DIN
4150-3.
The manufacturer shall not be liable for any damage to buildings.
4.10 Safety features
Safety features protect the operator of this machine from being exposed
to the existing hazards. These are barriers (guards) or other technical
measures. The source of danger is switched off or the danger is reduced
in certain situations.
WARNING
Hot exhaust!
Contact may cause burns.
► Only operate the machine if the safety features are correctly fitted.
► Do not change or remove safety devices.
1 V-belt guard
4
To Next Page
Loading...
