Maintenance
Maintenance work 9.3
33
[en] | 02/2020 | 5100056064 | VP | Operator’s manual
Maintenance work daily weekl
y
month
ly
100h 125h 250h 300h 500h
Clean the machine.
• Visual check for complete-
ness.
• Visual check for damage.
●
Check engine oil fill level. ●
Check air filter intake area. ●
Check screw connections. ●
Clean fuel filter. ●
Clean and check air filter. ●
Check the exciter oil level. ●
Check V-belt tension. ●
Clean the deposit cup. ●
Change engine oil. ●
Check spark plugs. ●
Check rubber buffer .* ●
Replace exciter oil. * ●
Check valve clearance.* ●
Replace the fuel filter. ●
* Have this work carried out by a service partner.
9.3 Maintenance work
Carrying out preparations
1. Place the machine on a level surface.
2. Decommissioning the machine.
3. Let the machine cool down.
9.3.1 Cleaning the machine
Observe the following when cleaning the machine with a high-
pressure cleaner:
1. Do not aim high-pressure cleaner directly at air intake area and
electrical components.
2. Do not hold the high-pressure cleaner too close to the machine in
order to avoid damage to labels and sensitive components.
9
To Next Page
Loading...
Need help?
General
