Wacker Neuson VP - Page 29

Commissioning
Putting into operation 7.3
29
[en] | 02/2020 | 5100056064 | VP | Operator’s manual
3
A
4. Move the throttle lever 3 into position A.
4
A
5. Move the engine switch4 into positionA.
5
6. Pull the starting handle 5.
ð Pull the starting handle slightly until resistance is felt, then pull it
strongly. Slowly return the starting handle.
B
7. Move choke lever to position A for starting, move choke lever back
to position B while the engine is warm.
ð Engine runs.
7