EasyManua.ls Logo

WACOM DTI-520 - Page 35

WACOM DTI-520
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Power Adaptor
Input voltage: 100 to 240 VAC, 50/60 Hz
Output voltage: 12 VDC, 3.3 A
Pen
Pen tip travel: 0.1 mm (0.004 in) or less
Eraser tip travel: 2 mm (0.08 in), approximately
Physical dimensions, weight: 14.0 x 159.0 mm, 16g (0.63 x 6.26 in, 0.56 oz)
Side switch type: Rocker switch
Tablet
Reading technology: Electromagnetic reasonance method
Active area: 304.1 x 228.1mm
Resolution:
20
lpmm (0.05mm) max.
Accuracy: +/-0.5mm, four corners ( 20 mm wide, 80 mm
long from each corner of four "L" shaped areas)
to be +/-2.0mm
Maximum reading height: 5mm
Maximum report rate: 100 points/sec., max
Pressure levels: 512 levels
Communication interface: USB or RS-232C serial