WACOM DTU-2231 - Page 3

1
Make sure computer and pen display are off.
Connect video cable. Select DVI or VGA.
(page 3)
Connect power cable.
Turn on pen display,
then computer.
(page 4)
Adjust screen resolution and settings.
Connect USB cable.
(page 5)
Install driver software from CD.
(page 6)
2
3
4
5
6
7
Analog (VGA)
Digital (DVI)
English
EN
DTU-Queen_QSG_WEG.book Page 1 Tuesday, January 12, 2010 4:00 PM