APPENDIX
INDEX
CONTENTS
INDEX
CONTENTS
68
68
Replacing the pen tip
The pen tip (nib) will wear with normal use. When the nib gets too short or develops a flat point, you can
replace it with another nib. Simply clasp the old nib with a tweezer, needle-nosed plier, or similar instrument
and pull it straight out of the pen. Then slide the end of the new nib straight into the barrel of the pen – firmly
push the nib until it stops.
Warning: Prevent children from swallowing the pen tip or side switch. The pen tip (nib) or side
switch may accidentally be pulled out if children are biting on them.
Note: Stroke nibs are spring-loaded, providing additional tactile feedback when you are working with the
Intuos3 pen or Airbrush. Stroke nibs are gray in color and are installed in the same manner as a standard
pen nib.
To order replacement parts, see other par
ts and accessories.
Uninstalling the software
Follow the appropriate procedure below to remove the Wacom tablet driver software from your system.
Important: When you remove the Wacom tablet driver software from your system, any other Wacom
tablet connected to your computer will no longer operate with full Wacom tablet functionality.
Windows Vista: Click on the Windows
START button and choose CONTROL PANEL. In the CONTROL PANEL
window, click on U
NINSTALL A PROGRAM. In the dialog box that appears, choose the TABLET option. Click on
the R
EMOVE... button and follow the prompts to remove the tablet driver.
Windows XP or XP x64: Click START. In the start menu, select CONTROL PANEL. Then select ADD OR
R
EMOVE PROGRAMS. In the ADD OR REMOVE PROGRAMS window, choose TABLET and click on the REMOVE
button. Follow the prompts to remove the tablet driver.
Macintosh OS X:
From the Go menu, choose A
PPLICATIONS and open the TABLET folder. Double-click on the REMOVETABLET
icon and select the R
EMOVE TABLET SOFTWARE button. Enter your administrator login name and password.
After the removal is completed, click OK.
Important: When the
Intuos3 pen is not in
use, place it in the pen
stand or lay it flat on
your desk. When the
optional Airbrush is not
in use, lay it flat on your
desk. To maintain the
sensitivity of your pen or
Airbrush tip, do not store
the tools in a container
where they will rest on
their tip or eraser.