WAGNER EvoMotion 20-30 - Data

Operating manual Piston Pump EvoMotion 20-30
5 Description
20 Order number 2333553 | Edition 09/2020
5.5 DATA
5.5.1 Materials of Paint-wetted Parts
Paint-wetted part Product
Pump housing Stainless steel
Piston Stainless steel
Valve balls Stainless steel
Valve seats Stainless steel
Static seals PTFE
Packings PE / T
PE = Polyethylene UHMW
T = Polytetrafluorethylene (PTFE)
Positions of the individual parts: See Chapter Spare Parts [853].
5.5.2 Recommended Packings
WAGNER packings for this device:
Code Product Color
PE Ultra high molecular weight
polyethylene
transparent
T PTFE white
Each product has the following properties, which influence the packings:
Designation PE T
Mechanical stability good poor
Friction coefficient good very good
Sealing force good good
Chemical resistance very good very good
Temperature resistance very good poor
5.5.3 Technical Data
Description Units Evo Motion 20-30
Pump ratio 20:1
Volume flow per double stroke (DH) cm³ / cc 30
Maximum operating pressure MPa
bar
psi
13.5
135
1958
Maximum possible strokes in operation DH/min 60
Maximum recommended strokes per minute
in continuous operation
DH/min 40
Minimum/maximum air inlet pressure MPa
bar
psi
0.2–0.8
2–8
28–116
Compressed air quality: free from oil and wa-
ter
Quality standard 7.5.4 according to ISO 8573.1, 2010
7: Particle concentration 5–10mg/m³