Operating manual Piston Pump EvoMotion 20-30
2 Correct Use
Order number 2333553 | Edition 09/2020 9
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
4 Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in the Chapter Technical Data.
4 Check if the fluids and solvents being used are compatible with the pump
construction materials as indicated in the Chapter Materials of Paint-wetted Parts.
4 Use suitable device combinations (packings, valves etc.)
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Application EvoMotion 20-30
Furniture industry ↗
Kitchen manufacturers ↗
Joinery ↗
Window factories →
Steel-processing industry →
Construction of vehicles ↗
Shipbuilding ↘
Signs and definitions: ↗ recommended
→ limited suitability
↘ not suitable
2.5 MISUSE
Misuse can lead to physical injury and/or property damage! Special attention must be paid
that:
4 No dry coating products, e.g., powder are processed.
4 No food, medicine or cosmetics are processed. It is important to note that the device's
materials are not food-safe.
To Next Page
Loading...
