WAGNER EvoMotion 20-30 - Filling with Working Product

Operating manual Piston Pump EvoMotion 20-30
7 Operation
Order number 2333553 | Edition 09/2020 37
2. Point the spray gun, without nozzle, into the tank (5) and open it.
3. Slowly open the ball valve (2).
4. Rinse until clean flushing agent flows from the spray gun.
5. Close ball valve (2).
6. As soon as there is no pressure remaining in the system, close the spray gun.
7. Secure the spray gun.
8. Dispose of the contents of the tank (5) according to the local regulations.
External Cleaning
1. Clean the outside of the system.
2. Fully assemble the system.
3. Relieve the pump's pressure according to Chapter Pressure Relief / Work Interruption
[834].
4. Dispose of the contents of the tank (5) according to the local regulations.
7.6 FILLING WITH WORKING PRODUCT
After basic flushing, the pump can be filled with working material.
4 Proceed according to Chapter Filling the Empty Pump [843], but use working
product instead of flushing agent.