WAGNER P20 0552488 - Appendix (Continued)

P20 19
GB
Appendix
12.5 TempSpray
The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose (regulated
from20°Cto60°C).
Advantages:
 • Constantpainttemperatureevenatlowoutsidetemperatures
 • Considerablybetterworkingofhighviscositycoatingmaterials
 • Increasedapplicationeciency
 • Savingsinsolventsduetoreductioninviscosity
 • Adaptabletoallairlessunits
Order No. Description
2311659
2311852
TempSpray H 126 (ideal for lacquer jobs)
Basic unit 1/4“ incl. stainless steel hose, DN6, 1/4“, 10m
Spraypackconsistingof:basicunit(2311659),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder(F-thread)and
Trade Tip 2 Fine Finish 410
2311660
2311853
TempSpray H 226 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 15m, hose 1/4“ DN4, 1m
Spraypackconsistingof:Basicunit(2311660),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder(F-thread)and
TradeTip2nozzle419
2311661
2311854
TempSpray H 326 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 30m, hose 1/4“ DN4, 1m
Spraypackconsistingof:Basicunit(2311661),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder(F-thread)and
TradeTip2nozzle421
TempSpray H 126
TempSpray H 226
TempSpray H 326