43
OPERATING MANUAL
VERSION 01/2013 ORDER NUMBER DOC 2335747
9.6 MATERIAL HOSES
The lifetime of the uid hoses is, even with appropriate handling, reduced due to
environmental in uences.
Check hoses, pipes and couplings every day and replace if necessary.
As a precaution uid hoses should be replaced after a period speci ed by the plant
operator.
Bursting hose, bursting threaded joints!
Danger to life from injection of material.
Ensure that the hose material is chemically resistant to the
sprayed materials.
Ensure that the spray gun, threaded joints and material hose
between the device and the spray gun are suitable for the
pressure generated in the device.
WARNING
9.7 DECOMMISSIONING
When the equipment must be scrapped, please di erentiate the disposal of the waste
materials. The following materials have been used:
Steel
Aluminum
Elastomerics
Plastics
The consumable materials (paints, adhesives, sealers, solvents) must be disposed of
according to the valid speci c standards.
To Next Page
Loading...
