WAGNER PM500 - CE Declaration of Conformity

49
II 2G IIB T4 +4°C Tamb +40°C
OPERATING MANUAL
VERSION 01/2013 ORDER NUMBER DOC 2335747
11.3 CE DECLARATION OF CONFORMITY
Herewith we declare that the supplied version of the pneumatic double diaphragm pumps
with Order No.
comply with the following guidelines:
2006/42/EC 94/9/EC Atex Directive
Applied standards, in particular:
DIN EN ISO 12100: 2011 DIN EN 809: 2012 DIN EN ISO 4413: 2011
DIN EN ISO 4414: 2011 DIN EN 12621: 2011 DIN EN 1127-1: 2011
DIN EN ISO 13463-1: 2009 DIN EN ISO 13732-1: 2008 DIN EN 14462: 2010
Applied national technical standards and speci cations, in particular:
BGR 500 part 2 Chapter 2.29 and Chapter 2.36 TRBS 2153
Labeling:
EC Certi cate of Conformity
The CE certi cate of conformity is enclosed with this product. If needed, further copies
can be ordered through your WAGNER dealer by specifying the product name and serial
number.
Order No.: 2335753
U509.A0
U509.A0A