30 ProSpray 22
g
Description of unit Starting operation
3.5 Technical data ProSpray 22
Voltage: 230 V AC, 50/60 Hz or
120 V AC, 50/60 Hz
Max. current consumption:
230 V AC
7 A
120 V AC 12 A
Power cord: 3 x 1.5 mm
2
– 6 m
Acceptance capacity: 1035 Watts
Max. operating pressure: 23 MPa (230 bar)
Volume flow at 120 bar
(12 MPa) with water:
1.89 l/min
Max. tip size: 0.022 inch – 0.56 mm
Max. temperature of the
coating material:
43°C
Max. viscosity: 20.000 MPa·s
Weight: 15.5 kg
Special high-pr
essure hose:
DN 6 mm,
15 m connecting
thread M 16 x 1.5
Dimensions (L x W x H): 480 x 345 x 405 mm
Max. sound pressure level: 80 dB (A) *
* Place of measuring: 1 m in distance from the unit and 1.6
m above the floor, 12 MPa (120 bar) operating pressure,
reverberant floor.
3.6 Transportation in vehicle
Secur
e the unit with a suitable fastening.
4. Starting operation
4.1 High-pressure hose, spray gun and
separating oil
1. Screw the high-pressure hose (2) to the coating mate-
rial outlet (Fig. 2, Item 1).
2. Screw the spray gun (3) with the selected tip onto the
high-pressure hose.
3. Tighten the union nuts at the high-pressure hoses
firmly so that coating material does not leak.
EasyGlide pr
events incr
eased wear
and tear to the packings.
To Next Page
Loading...
