WAGNER SPRINT XE

20
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2354920
SPRINT XE
5.1.2 DESCRIPTION OF SPRINT 60 L XE TANK (WITHOUT VIBRATOR TABLE)
5
4
3
2
1
6
P_02642
Pos Designation
1 Equipment trolley
2 EPG-Sprint XE control unit
3 PEM-X1 manual gun
4 60 L tank
5 Powder injector, PI-F1
6 Fluid air throttle
Function:
Through the powder injector (5), the powder is transported from the tank (4) to the spray
gun (3). By feeding  uid air into the  uid base of the powder tank (4), a homogeneous
powder/air mixture is generated and maintained during the entire process of the powder
feed from the tank.
The powder quantity and the electrostatic charge of the color powder are regulated by the
control unit (2). The  uid air setting is done using the throttle (6).
Note:
We recommend using a vibrator table when working with powders that are di cult to feed
(see Chapter
12.13).