WAGNER W 690 Flexio User Manual

14
W 690 Flexio Extra Spray Kit
AUS
Spare Parts List Wall Extra I-Spray spray attachment (Fig. 28)
5 Suction tube 2389 021
6 Container seal 2389 023
7 Container with cover 1800 ml (only for Wall Extra I-Spray spray
attachment)
2304 025
Spare Parts List W 690 Flexio (Fig. 29)
Pos. Designation Order No.
1 Carrying belt 2322 299
2 Gun handle 2362 879
3 Air hose 2362 880
4 Cover of air lter compartment (right and left) 2316 052
5 Air lter (2 pcs.) 2318 585
6 Stirring rod 2304 419
7 Feed hopper (3 pcs.) 2304 028
Lubricating grease 2315 539
20. Accessories
The CLICK&PAINT SYSTEM with additional spray attachments and accessories oers
the right tool for each work.
Further information about the WAGNER range of products for renovating is available
under www.wagner-group.com
21. Environmental protection
The device and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system
or disposed of as household rubbish. It has to be disposed of separately as
special waste. Please pay special attention to the instructions on the product
packaging.
22. Important Note regarding Product Liability!
According to an EU directive, the manufacturer is only liable without limitation for faults
in the product if all parts come from the manufacturer or have been approved by the

WAGNER W 690 Flexio Specifications

General

Weight	2.4 kg
Technology	HVLP
Spray Width	250 mm
Frequency	50 Hz
Container Capacity	0.9 l
Paint container volume	0.9 l
Voltage	230 V