10 • Quick Start
Starting up the Bluetooth® Modules
WAGO-I/O-SYSTEM 750
I/O Modules
4. In the module's context menu, choose Settings. This opens the Bluetooth
®
-
specific parameterization dialog of the module (see Figure 3).
Figure 3: Bluetooth
®
-specific parameter area g064418e
Attention
For the following, the Bluetooth
®
module's must remain intact; i.e., no con-
figuration attempts have been attempted. If this is not the case, click on the
[Default] button to restore the module to factory default settings.
5. Click on [Data Frame] in the toolbar.
6. Enter (if not already set) a process image size of 48 bytes and a mailbox
size of 12 bytes (see Figure 4).
Figure 4: Data structure g064444e
7. Click on the [Read] button in the toolbar to update the view of the con-
figuration in the module.
To Next Page
Loading...
Need help?
General
