To Next PageTo Next PageWhat to do if a CPU exception error occurs in WAGO I/O-SYSTEM 750 I/O Systems?
If a CPU exception error occurs with your WAGO I/O Systems, it's recommended to contact WAGO support. When you reach out, be prepared to explain the blink code displayed on the device, as this will help them diagnose the issue.
What to do if WAGO I/O-SYSTEM 750 show 'Not supported I/O module'?
If your WAGO I/O Systems encounter a 'Not supported I/O module' error, contact WAGO support. Make sure to provide the blink code that is displayed.
What to do when WAGO I/O Systems have a configuration error?
If you are experiencing a configuration error with your WAGO I/O Systems, it's best to contact WAGO support directly and provide them with the blink code that the system is displaying.
What to do if WAGO I/O-SYSTEM 750 have hardware and configuration error?
If you encounter a hardware and configuration error with your WAGO I/O Systems, contact WAGO support. Be ready to share the blink code displayed by the system to help them understand the problem.
General| Category | I/O Systems |
|---|---|
| Manufacturer | WAGO |
| Product Name | WAGO I/O-SYSTEM 750 |
| Type | Modular I/O System |
| Power Supply | 24 V DC |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Protection Class | IP20 |
| Mounting | DIN Rail |
| Communication Protocol | Various (e.g., Ethernet, CANopen, etc.) |
| Number of I/O Modules | Up to 64 modules |
| Number of Channels | Varies by module |
| Digital Input Modules | Yes |
| Digital Output Modules | Yes |
| Analog Input Modules | Yes |
| Analog Output Modules | Yes |
| Special Function Modules | Yes |
| Approvals | CE, UL |
| Bus Coupler | Yes |
