WAGO WAGO-I/O-SYSTEM 750 XTR User Manual

2 WAGO-I/O-SYSTEM 750 XTR
750-352/040-000 FC ETHERNET G3 XTR
Manual
Version 1.3.0
© 2019 WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.
WAGO Kontakttechnik GmbH & Co. KG
Hansastraße 27
D-32423 Minden
Phone: +49 (0) 571/8 87 – 0
Fax: +49 (0) 571/8 87 – 1 69
E-Mail: info@wago.com
Web: www.wago.com
Technical Support
Phone: +49 (0) 571/8 87 – 4 45 55
Fax: +49 (0) 571/8 87 – 84 45 55
E-Mail: support@wago.com
Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.
E-Mail: documentation@wago.com
We wish to point out that the software and hardware terms as well as the
trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.
WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.
=== Ende der Lis te f ür T e xtmar ke Ei nb and _vor ne = ==

WAGO WAGO-I/O-SYSTEM 750 XTR Specifications

General

Product Type	I/O System
Series	750 XTR
Protection Class	IP20
Number of Modules	Up to 64
Power Supply	24 V DC
Relative Air Humidity	95 % (non-condensing)
EMC Immunity to Interference	EN 61000-6-2
Operating Temperature	-40°C to +70°C
Bus System	Fieldbus independent
Shock Resistance	15g
EMC Emission of Interference	EN 61000-6-4
Approvals	ATEX, IECEx
Connection Technology	Spring-loaded terminals
Number of Channels	Varies by module
Mounting Type	DIN Rail
Certifications	ATEX