13 Pulse 2 User Manual
The USB Connection
Using a USB cable you can connect the Pulse 2 to your
computer observing the following system requirements:
• Windows PC: Windows XP or newer is recom-
mended, a USB port
• Linux PC, a USB port
• Apple: Intel Mac with Mac OS X 10.5 or newer, a
USB port
• Apple iPad with iPad Camera Connection Kit
The USB connection of the Pulse 2 allows:
• transmitting and receiving MIDI data
• dumping of firmware updates to the Pulse 2
• Sounds / Global parameters backup and recall
with suitable computer software.
w Make sure to use a computer USB port as well as
a USB cable to avoid problems with data trans-
mission.
w Keep also in mind that we often offer new firm-
ware updates. Please read also the chapter "Up-
dating the Firmware".
To Next Page
