Sound Parameter
Pulse 2 User Manual 28
The Arpeggiator Section (ARP)
An Arpeggiator is a device that splits an incoming MIDI
chord into its single notes and repeats/reorder them
rhythmically. Different sequence modes can be defined
for the Arpeggiator to cover a wide range of applica-
tions. In addition to the synthesis features, the Pulse 2
offers a Arpeggiator for every sound.
w If you press the Arp Parameter Matrix button,
the display changes automatically to the Arpeg-
giator parameter page.
Arpeggiator Display Parameter
The Arpeggiator display parameter can be edited with
the Selection buttons and the Selection dial.
Use the Selection buttons to select the desired para-
meter, which can be edited with the Selection dial.
w The Step Editor parameters are different to edit.
Please read the corresponding manual section.
ARP Step Duration 12...1600%
Sets the length of the step length in relation to ARP
Clock.
ARP Swing 0%...100%
Determines how much the" timing affects an arpeggio
step. If" ARP Swing is set to 50% (default setting), the
arpeggio "is played back without any shuffled" timing. A
setting of 66% !creates a ternary shuffled rhythm. Set-
tings between 50% and 66% are perfect for finetuning
of this groove, settings besides this can be used for expe-
rimental grooves.
To Next Page
Loading...
