Additional Settings
41 Pulse 2 User Manual
se 2 receives MIDI properly, set MIDI Channel
to any other value than omni.
MIDI Thru OFF / ON
Activates the MIDI Thru function of the MIDI Out port.
Incoming MIDI data will be automatically sent via MIDI
Out port to connected MIDI devices. Additionaly, the
Pulse 2 will send out its own data via MIDI Out.
Clock AUTO / INTERN / EXTERN
Determines how the Pulse 2 reacts on incoming MIDI
Clock messages:
• AUTO means that the Pulse 2 automatically
syncs to incoming MIDI Clock if it is sent to it
by an external device like a sequencer or
drum machine. If there is no MIDI Clock
present, the Pulse 2 generates its internal
tempo base. This is the recommended setting
that works in almost all situations.
• INTERN means that the Pulse doesn’t react
on incoming MIDI Clock nor does it send
MIDI Clock. The Pulse 2 only syncs to its
own tempo base that is set by ARP Tempo.
• EXTERN means that the Pulse 2 syncs to in-
coming MIDI clock only.
TX Arp Clock OFF / ON
Determines whether Arpeggiator tempo is sent out as
MIDI clock data over USB MIDI and MIDI.
TX Arp Notes OFF / ON
Determines whether Arpeggiator notes are sent by the
Pulse 2 over USB MIDI and MIDI.
TX Parameter OFF / CC / SYSEX / CC+SYS
Determines how Real-Time Sound Parameter Changes
are sent by the Pulse 2.
• If OFF is selected, no data is sent.
• If CC is selected, only controller messages are sent.
Parameters without a dedicated controller are not
sent at all.
• If SYSEX is selected, all Sound parameters are sent
as system exclusive messages. The disadvantage is
a larger amount of data that is transferred.
To Next Page
Loading...
