Waldorf Pulse - Routing a Modulation Source to CV 2 out

34
User’s Manual Pulse • PulsePlus
Routing a Modulation Source to CV 2 Out
 On the Pulse Plus, one of the 16 modulation sources can be routed to the CV 2 Out jack
with variable amount. In this case, the control voltage is treated as a kind of destination in
the modulation matrix.
☞ This is how you route a modulation source to CV 2 Out:
• Choose the modulation unit for the control voltage by means of the Select
parameter:
• Adjust the values for the source and the amount parameters in the same way as it’s
done at the other modulation assignments.
Control Voltage CV 2