To Next PageTo Next PageWhy does my Walgreens BD-7181W Blood Pressure Monitor reading seem too high or too low?
If your Walgreens Blood Pressure Monitor displays a blood pressure value that seems too high or too low, it could be due to several reasons. Ensure the cuff is aligned correctly. If the circuitry is locked, remove and reinsert the batteries before taking another measurement. Also, check that the cuff is positioned correctly.
What to do if Walgreens BD-7181W shows flashing replace battery symbol?
If you are ignoring the flashing replace battery symbol on your Walgreens Blood Pressure Monitor, it means the batteries have run down. Replace them with 4 new "AA" batteries to continue measuring your blood pressure. Alternatively, remove and reinsert the batteries, then try taking a measurement again.
Why is it important not to move or speak during measurement with Walgreens BD-7181W Blood Pressure Monitor?
Remember that it is important not to move and speak as it may elevate measurements of your Walgreens Blood Pressure Monitor.
General| Brand | Walgreens |
|---|---|
| Model | BD-7181W |
| Category | Blood Pressure Monitor |
| Language | English |
Explains the benefits of home monitoring for health management and doctor visits.
Defines blood pressure as the force exerted on arteries as blood flows through the body.
Presents WHO guidelines for normal, borderline, and high blood pressure.
Lists factors affecting blood pressure fluctuations like temperature, stress, and lifestyle.
Explains that hypertension is often asymptomatic and requires monitoring.
Explains the oscillometric method used for measuring blood pressure and pulse.
Explains the meaning of various symbols and readings shown on the digital display.
Provides instructions on how to install and replace the batteries in the monitor.
Guides users on how to set the correct time and date on the blood pressure monitor.
Lists pre-measurement steps like sitting quietly and avoiding caffeine/smoking.
Advises on proper posture, consistency, and remaining still during measurement.
Details the process of taking a blood pressure reading, from inflation to deflation.
Guides users on how to select a user zone and view stored blood pressure readings.
Offers essential tips for maintaining the monitor, avoiding damage, and cleaning it.
Explains common error symbols like 'ERROR' and battery symbol, and how to resolve them.
Addresses issues causing readings to seem too high or too low and how to fix them.
Describes how to resolve situations where a measurement cannot be taken after an error symbol.
Provides a template for users to record their blood pressure readings over time.
