Why won't my Walgreens WGNBPA-220 turn on?
If your Walgreens Blood Pressure Monitor doesn't turn on when you push the START/STOP button, the batteries may have run down. Replace them with 4 new 'AAA' alkaline batteries. Also, check that the battery polarities are positioned correctly and re-insert them if needed.
Why does my Walgreens Blood Pressure Monitor show the excessive body motion detector symbol?
If the Walgreens Blood Pressure Monitor displays the 'Excessive body motion detector' symbol, it means there was excessive body movement, especially of the arm with the cuff, during the measurement. Try measuring again, keeping your arm steady. Also, make sure the cuff is wrapped correctly. If you still have questions about how to properly wear the arm cuff, please consult your healthcare professional.
What to do if my Walgreens WGNBPA-220 Blood Pressure Monitor shows EE error or incorrect blood pressure?
If your Walgreens Blood Pressure Monitor displays the 'EE' error symbol or shows a blood pressure value that seems excessively low or high, it might be due to incorrect cuff placement. Make sure you wrap the cuff properly and position it correctly, then measure again.
How to fix E1 error on Walgreens WGNBPA-220 Blood Pressure Monitor?
If the Walgreens Blood Pressure Monitor displays the 'E1' error symbol, it indicates an air circuit abnormality. This could mean the cuff tube isn't properly plugged into the monitor. Check the cuff connection and then measure again.
What does E3 mean on Walgreens WGNBPA-220 Blood Pressure Monitor?
If the Walgreens Blood Pressure Monitor displays the 'E3' error symbol, it means there was an error determining measurement data. Try measuring again. If the circumference of your upper arm differs greatly from your forearm, ensure the cuff is wrapped correctly. If you have questions on how to properly wear the arm cuff, please consult your healthcare professional.
What does EP mean on Walgreens WGNBPA-220 Blood Pressure Monitor?
If your Walgreens Blood Pressure Monitor displays the 'EP' error symbol, turn the monitor off and measure again. If the 'EP' error still appears, please call a Consumer Relations representative.
What does E2 error mean on Walgreens WGNBPA-220 Blood Pressure Monitor?
If the Walgreens Blood Pressure Monitor displays the 'E2' error symbol, it means the inflation pressure exceeded 300 mmHg. Switch the unit off, and then measure again.
General| Category | Blood Pressure Monitor |
|---|---|
| Brand | Walgreens |
| Model | WGNBPA-220 |
| Type | Upper Arm |
| Technology | Oscillometric |
| Accuracy | Pressure: ±3 mmHg, Pulse: ±5% |
| Display | LCD |
| Automatic Shut-off | Yes |
| Irregular Heartbeat Detection | Yes |
| Hypertension Indicator | Yes |
| WHO Blood Pressure Classification Indicator | Yes |
| Memory | 120 Readings |
| Measurement Range | Pressure: 0-299 mmHg, Pulse: 40-180 pulses/minute |
| Power Source | 4 AA Batteries |
| Average Function | Yes |
| User Profiles | 2 Users |
To Next Page