Why won't my Walgreens Blood Pressure Monitor turn on?
If your Walgreens Blood Pressure Monitor does not turn on when you press the START/STOP button, the batteries may be depleted. Replace the old batteries with four new “AAA” alkaline batteries. Also, ensure that the battery polarities (+/-) are correctly positioned. If they are not, re-insert the batteries in the correct positions.
What to do if Walgreens WGNBPA-950 shows EE error?
If your Walgreens Blood Pressure Monitor displays the EE error symbol or shows blood pressure values that seem too low or high, make sure the UltraSoft™ upper arm cuff is correctly positioned. Readjust the cuff, ensuring proper placement, and then take a new measurement. Also, remain still and do not talk during the measurement. If you moved or talked, keep your arm steady and measure again.
How to fix E1 error on Walgreens WGNBPA-950 Blood Pressure Monitor?
If your Walgreens Blood Pressure Monitor displays the E1 error symbol, it indicates an air circuit abnormality. Check the cuff connection to ensure the cuff tube is correctly plugged into the monitor. Then, take a new measurement.
What does E3 error mean on Walgreens WGNBPA-950?
If your Walgreens Blood Pressure Monitor displays the E3 error symbol, it means there was an error determining measurement data. Re-wrap the cuff properly so that it is positioned correctly, and then take a new measurement.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPA-950 |
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Technology | Oscillometric |
| Irregular Heartbeat Detection | Yes |
| Average Reading | Yes |
| Accuracy - Pressure | ±3 mmHg |
| Display | LCD |
| Measurement Range - Pulse | 40-199 bpm |
| Accuracy - Pulse | +/- 5 % |
| Power Source | 4 AA batteries |
| Cuff Size | 22-42 cm |
| Measurement Range - Pressure | 0-300 mmHg |
To Next Page