Why won't my Walgreens WGNBPA-730 Blood Pressure Monitor turn on?
If your Walgreens Blood Pressure Monitor isn't turning on, the batteries may be dead. Try replacing them with four new “AAA” alkaline batteries. Also, ensure the battery polarities are correctly positioned; if not, re-insert them in the correct positions.
What to do if my Walgreens Blood Pressure Monitor shows the EE error?
If your Walgreens Blood Pressure Monitor displays the EE error symbol or shows blood pressure values that seem too low or high, make sure the cuff is correctly placed. Wrap the cuff properly and measure again. Also, keep your arm steady and avoid talking or moving during the measurement. Shaking of the arm with the cuff on can also cause this error.
How to fix E1 error on Walgreens WGNBPA-730 Blood Pressure Monitor?
If your Walgreens Blood Pressure Monitor shows an E1 error, it indicates an air circuit abnormality. Check the cuff connection to ensure the cuff tube is correctly plugged into the monitor. Then, measure again.
What does E2 error mean on Walgreens WGNBPA-730 Blood Pressure Monitor?
An E2 error on your Walgreens Blood Pressure Monitor means the inflation pressure exceeded 300 mmHg. Switch the unit off, and then measure again.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPA-730 |
| Category | Blood Pressure Monitor |
| Language | English |
Explains the IHB icon and its detection of pulse irregularities.
Explains the Risk Category Index and directs users to more details.
Category for blood pressure readings indicating Stage 2 Hypertension.
To Next Page