Walgreens WGNBPA-240BT

Questions and Answers

M
meghan33Aug 2, 2025
Why does Walgreens WGNBPA-240BT show excessive body motion detector symbol?
- J
  John BrownAug 2, 2025
  If your Walgreens Blood Pressure Monitor displays the “Excessive body motion detector symbol”, it means there was excessive body movement during the measurement. This can be caused by talking, moving, or shaking your arm while the cuff is on. To resolve this, measure again, keeping your arm steady. Also, make sure the arm cuff is wrapped correctly. If you have questions on how to properly wear the arm cuff, please consult your healthcare professional.
S
Suzanne WallAug 6, 2025
What to do if Walgreens WGNBPA-240BT Blood Pressure Monitor shows E4 error?
- M
  megancrosbyAug 6, 2025
  If the Walgreens Blood Pressure Monitor displays the E4 error, it indicates a data transmission error. Here's what you can do: * Ensure Bluetooth is turned ON on your mobile device and try again. * Verify that your mobile device is compatible (iOS 5.0 or newer, or Android 4.3 and newer). * Make sure the app is open on your mobile device and try again. * Ensure the monitor and mobile device are within 32 feet (10 meters) of each other. * Confirm your last reading is stored in memory and the app is open, then try again. * Try removing and re-inserting the batteries. If the issue persists, consider returning the device to your local distributor or importer.
S
Suzanne BatesAug 11, 2025
What to do if Walgreens WGNBPA-240BT displays EE measurement error?
- B
  brandon35Aug 11, 2025
  If your Walgreens Blood Pressure Monitor displays the EE error symbol or shows blood pressure values that seem too low or high, it might be due to incorrect cuff placement. Make sure you wrap the cuff properly so that it is positioned correctly, and then measure again.
T
Tammy MartinAug 15, 2025
What does E3 error mean on Walgreens WGNBPA-240BT?
- M
  msmithAug 15, 2025
  If your Walgreens Blood Pressure Monitor displays the E3 error symbol, it means there was an error determining measurement data. First, turn off the monitor and measure again. If the 'EP' error still appears on the display, please call Consumer Relations. Also, ensure the cuff is wrapped correctly. Consult your healthcare professional if you have questions on how to properly wear the arm cuff.
P
perezaprilAug 19, 2025
What does E1 error mean on Walgreens WGNBPA-240BT Blood Pressure Monitor?
- W
  wandasparksAug 19, 2025
  If your Walgreens Blood Pressure Monitor displays the E1 error symbol, it indicates an air circuit abnormality. Check the cuff connection to ensure the cuff tube is correctly plugged into the monitor, then measure again.
Z
zmurrayAug 23, 2025
What does EP error mean on Walgreens WGNBPA-240BT?
- D
  David WardAug 23, 2025
  If your Walgreens Blood Pressure Monitor displays the EP error symbol, it indicates a system error. To resolve this, measure again.
F
Franklin NorrisAug 27, 2025
What does E2 error mean on Walgreens WGNBPA-240BT Blood Pressure Monitor?
- R
  roachsusanAug 27, 2025
  If your Walgreens Blood Pressure Monitor displays the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off, then measure again.