Why Walgreens Blood Pressure Monitor does not turn on?
If your Walgreens Blood Pressure Monitor isn't turning on when you press the START/STOP button, it could be due to the following reasons: * The batteries may be drained. Replace them with four new “AAA” alkaline batteries. * The batteries might be incorrectly positioned. Re-insert the batteries in the correct positions, paying attention to the polarities.
What to do if Walgreens Well WGNBPA-945 shows EE error?
If your Walgreens Blood Pressure Monitor displays the 'EE' error, it could be due to several reasons: * The cuff might be incorrectly placed. Ensure the cuff is wrapped properly and positioned correctly, then measure again. * Movement or talking during measurement can also cause this error. Keep your arm steady and avoid talking while measuring. Then, measure your blood pressure again. * Shaking of the arm with the cuff on can trigger the error.
What to do if Walgreens Well WGNBPA-945 Blood Pressure Monitor shows E1 error?
If your Walgreens Blood Pressure Monitor displays the 'E1' error, it indicates an air circuit abnormality. Make sure the cuff tube is correctly plugged into the monitor and measure again.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPA-945 |
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Measurement Method | Oscillometric |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Features | Irregular heartbeat detection |
To Next Page