Why my Walgreens WGNBPW-915 Blood Pressure Monitor does not turn on?
If your Walgreens Blood Pressure Monitor does not turn on when you press the START/STOP button, the batteries may be dead. Replace them with two new “AAA” alkaline batteries. Also, make sure that the battery polarities are correct. If they are not, re-insert the batteries in the correct positions.
What to do if Walgreens WGNBPW-915 shows EE error?
If the Walgreens Blood Pressure Monitor displays the 'EE' error, or the blood pressure reading seems too low or too high, ensure the cuff is correctly positioned and re-measure. Also, remain still and do not talk during the measurement. If you are shaking your wrist while taking a measurement, keep your wrist steady.
What to do if Walgreens Blood Pressure Monitor shows EP error?
If the Walgreens Blood Pressure Monitor displays the 'EP' error, turn it off and measure again. If the 'EP' error continues to appear, please call a Consumer Relations representative.
General| Brand | Walgreens |
|---|---|
| Model | WGNBPW-915 |
| Category | Blood Pressure Monitor |
| Type | Upper Arm |
| Measurement Range - Pressure | 0-300 mmHg |
| Memory | 120 readings |
| Display | LCD |
| Automatic Shut-off | Yes |
| Irregular Heartbeat Detector | Yes |
| Measurement Range - Pulse | 40-199 beats/minute |
| Warranty | 1 year |
| Cuff Size | 22-42 cm |
| Power Source | 4 x AA batteries or AC adapter (optional) |
To Next Page